Blog
16 Nov 2026
Field notes: the switchback that would've stranded a transformer trailerA recurring routing hazard on renewables haul routes: the switchback that reads fine on paper but fails a swept-path check in the field.
16 Nov 2026
How to check roundabout geometry before routing a blade trailerHow to check roundabout geometry, inner radius clearance, and swept path before routing an oversize blade trailer through it.
9 Nov 2026
Single-piece vs segmented blades: why haul route screening changesSingle-piece and segmented blade hauls fail a route check for different reasons. Here's what changes in the screening depending on which one you're moving.
9 Nov 2026
What GSD do you need to measure road width from satellite imagery?What ground sample distance gets you a usable road width reading for haul route planning, and where pixel size alone stops being enough.
2 Nov 2026
Field notes: the roundabout that looked fine on the map and wasn'tA desk check catches what a roundabout's geometry hides from a route plan, and why that beats finding out with a blade trailer stuck mid-apron.
2 Nov 2026
What superelevation means for an abnormal load routeSuperelevation banks a curve for cars at speed, not a crawling abnormal load. Here's why that matters for route screening before mobilization.
26 Oct 2026
Crane pad vs laydown yard: what's the differenceCrane pad and laydown yard aren't the same thing. How each one gets sized, and why routing teams need to check both before mobilisation.
26 Oct 2026
How to spot a low railroad underpass before routing a blade haulHow to spot a low railroad underpass on a blade haul route from imagery before you send a pilot car survey down it.
19 Oct 2026
Field notes: the switchback that didn't show up until we zoomed in twiceA haul route looked clean at first pass. A second zoom level found the hairpin that would have stopped the convoy cold.
19 Oct 2026
Checking overhead utility line clearance before you schedule the haulHow to find and verify every overhead utility crossing on a haul route before the permit gets filed, not after the pilot car is already rolling.
14 Oct 2026
How to check haul road gradient before you commit a blade routeA grade profile pulled from contour data costs you an hour. A pilot car finding the same grade at 2% past plan costs you a week.
14 Oct 2026
Turning radius vs. bend radius on a haul route mapTurning radius and bend radius aren't the same number on a haul route map. Here's what each one measures and why mixing them up fails a haul.
13 Oct 2026
How to check bend radii on a route map before scheduling a blade haulHow to check bend radii on a route map before committing a blade haul plan, and why a flat map misses what's standing next to the curve.
13 Oct 2026
What counts as adequate laydown space for a transformer deliveryHow to size laydown space for a main power transformer delivery: crane footprint, trailer swing, jacking clearance, and what a desk check should confirm first.
7 Oct 2026
Bridge load rating vs. span length for abnormal load crossingsLoad rating and span length answer different questions for an abnormal load crossing. Here's how to read both before a haul plan goes out.
7 Oct 2026
How to calculate swept path for an oversize blade trailerA field guide to swept path analysis for blade trailers: the inputs, the offtracking math, and where a route gets checked before the model does.
7 Oct 2026
How wide does a haul road need to be for a wind turbine blade?Blade trailer width, swept path at bends, and why a single lane-width number doesn't answer the real haul road question.
7 Oct 2026
What is a pilot car route survey? A haul planner's quick referenceWhat a pilot car route survey covers, how it fits the oversize permit process, and why a desk check first saves a wasted survey trip.